Installing From A Network - National Instruments PXI-8184 User Manual

Chapter 2 Installation and Configuration

Installing from a Network

To launch the installation in unattended mode, type
Note
z:\os\i386\winnt.exe /u:z:\os\pxi8180.txt /s:z:\os\i386
Note For additional assistance with installing or changing an operating system, refer to
KnowledgeBase 2ZKC02OK at
NI PXI-8184/8185 User Manual
Complete the following steps to install an OS from a network.
1. Create a network bootdisk. (Refer to the
folder on your OS installation CD.)
netboot
2. Use another PC on the network with a CD-ROM drive. Share the drive
and load the OS installation CD.
3. Boot your NI PXI-8184/8185 using the network boot disk.
4. Run the net utility from the
(for example, drive
5. Run
winnt.exe
ni.com/support
drive. Map the shared CD-ROM
a:
).
z:
from the directory.
\os\i386
.
2-18
file in the
readme.txt
ni.com