Optional Equipment; Cabling - National Instruments DAQArb 5411 User Manual

Optional Equipment

Cabling

© National Instruments Corporation
National Instruments offers a variety of products to use with your
DAQArb 5411, including probes, cables, and other accessories, as
follows:
• Shielded and unshielded I/O connector blocks (SCB-68, TBX-68,
CB-68)
• RTSI bus cables
For more specific information about these products, refer to your
National Instruments catalogue or web site, or call the office
nearest you.
The following list gives recommended part numbers for cables that you
can use with your 5411 device:
• BNC male to BNC male, 50
(part number BNC-C-xx)
• BNC male to BNC male, 75
(part number 2249-E-xx)
• BNC female to RCA phono plug adapter, from ITT Pomona
Electronics (part number 5319)
• BNC 50 feed-through terminator adapter from ITT Pomona
Electronics (part number 4119-50)
• BNC female-female adapter from ITT Pomona Electronics
(part number 3283)
cable from ITT Pomona Electronics
cable from ITT Pomona Electronics
1-5
Chapter 1 Introduction
DAQArb 5411 User Manual