What You Need To Get Started - National Instruments DAQArb 5411 User Manual

Chapter 1 Introduction

What You Need to Get Started

DAQArb 5411 User Manual
RTSI bus triggers on devices that use the RTSI bus or the digital trigger
on the I/O connector.
Detailed specifications of the DAQArb 5411 devices are in
Appendix A, Specifications.
To set up and use your DAQArb 5411, you will need the following:
One of the following DAQArb 5411 devices:
– PCI-5411
– AT-5411
DAQArb 5411 User Manual
NI-DAQ for PC compatibles, version 5.0 or later
One of the following software packages and documentation:
– VirtualBench-Arb
– VirtualBench-Function Generator
– LabVIEW
– LabWindows
– Any standard C compiler
Cables and accessories
– SMB to BNC, 50
– SHC50-68 50-pin to 68-pin cable for pattern generator outputs
(optional)
– SCB-68 terminal block accessory in generic configuration
(optional)
16 MB memory module (optional)
Your computer
®
/CVI
cable
1-2 © National Instruments Corporation