Function Keys - Pfaff 3371-1 series Instruction Manual

7

Function keys

.04.03
With the function keys functions are switched on or off, parameters and operating modes
are selected and relevant values changed.
Each time a key is pressed, an acoustic signal is given (factory setting). If function keys are
pressed which are not permitted in accordance with the machine status, or if the top or
bottom limit of the input value is reached, a double signal tone can be heard.
A value is changed with the corresponding +/-key. In this way, e.g. by pressing and holding
+/- on key 6, the speed value 5 can be changed.
Menu
This function is used to scroll within various different screen displays.
Wind
The bobbin thread winding function is called up, see Chapter 9.03 Winding the bobbin
thread.
Basic position
Work clamp and needle are positioned in the basic position and , if necessary, the thread
trimming function is activated.
Tacting backwards
Each time the key is pressed, the selected seam program is sewn stitch by stitch in reverse,
and the coordinates for each stitch are shown on the control panel.
Tacting forwards
Each time the key is pressed, the selected seam program is sewn forwards stitch by stitch,
and the coordinates for each stitch are shown on the control panel.
Program stations
P8
P1
to
The function keys P1 to P8 are used to enter and select seam programs, see Chapter
9.06.02 Selecting the program station.
Direct program selection
P
This function is used to select a seam pattern. After selection, speed and size can be altered,
see Chapter 9.06.01 Selecting and altering the seam pattern.
P1 P3 P4 P5 P6 P7
P2
TE
X Y
88 2700 100 100
5
6
P8
P
C1
C2
C3
TE
Control elements
7 - 4