Oil Life Reset - Dodge 2015 RAM Owner's Manual

Table of Contents

Advertisement

7. Press and release the Up arrow button to exit the EVIC
screen once the Fuel Filter Life is 100%
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Oil Life Reset

Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will flash in the DID display for approximately 10
seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
NOTE: Use the steering wheel DID controls for the
following procedure(s)
UNDERSTANDING YOUR INSTRUMENT PANEL 203
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine.)
2. Press and release the DOWN arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Press and release the RIGHT arrow button to access
the "Oil Life" screen.
4. Press and hold the RIGHT arrow button for one
second to access the "Oil Life Reset" screen.
5. Press and release the DOWN arrow button to select
"Yes", then press and release the Right arrow button to
select reset of the Oil Life.
6. Press and release the Up arrow button to exit the DID
screen.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents