Dodge 2015 RAM Owner's Manual page 193

Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine.)
2. Press and release the LEFT arrow then press and
release the DOWN arrow button to scroll downward
through the main menu to "Vehicle Info".
3. Press and release the RIGHT arrow button to access
the "Vehicle Info" screen then scroll UP or DOWN to
select "Oil Life" .
UNDERSTANDING YOUR INSTRUMENT PANEL 191
4. Press and hold the RIGHT arrow button to select
"Reset", then select "NO" or "YES" by pressing the
RIGHT arrow then press the RIGHT arrow button to
select reset of the Oil Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the Fuel Filter indicator system did not
reset. If necessary, repeat this procedure.
3