Advertisement
Force Arming the System
I have this feature.
I do not have this feature.
If a protected door or window is open, you may have the option of "force
arming" with that point faulted. Faulted points (opened doors or windows)
that are force armed are not included in the system. The remaining points
arm normally.
Your system might not offer force arming or it may be restricted to
specific points. Contact your security company for more information.
To arm with points faulted:
1. Enter your personal passcode and press the ENT key, or enter an
arming command (COMMANDs 1, 2, or 3). The Command Center
emits a "buzz" tone indicating a point is faulted.
2. Press the COMMAND bar and then the ENT key. The system now
arms all points which are normal.
Note: If the fault is restored (returned to normal) while arming, the point
will be armed. If the fault is restored after arming, how your system is
programmed determines whether or not the point will be armed with the
rest of the system.
A faulted point will be armed with the rest of the system if restored.
A faulted point will not be armed with the rest of the system if
restored and will not be armed until I disarm the security system and
re-enter an arming command.
I am allowed to have a maximum of ______ points faulted when force
arming.
28
Advertisement
