Advertisement
Unbypass a Point
I have this feature.
I do not have this feature.
This feature requires a passcode.
Unbypassing a point is a way to return a bypassed point to the security
system so that it can once again respond to trouble and alarm conditions.
COMMAND
0 0
To Unbypass a Point:
1. Ensure that your security system is disarmed.
2. Press the COMMAND bar. The Command Mode indicator light comes
on.
3. Press the 0 key, then press the 0 key again. The system is now the
Unbypass mode.
4. To unbypass a point, press the number key that corresponds to the
number of the point that is flashing slowly, and then the ENT key. The
point status light stops flashing, indicating that the point has been
unbypassed.
26
Advertisement
