Advertisement
Turn the Entire System On Without Delays
I have this feature.
I do not have this feature.
This feature requires a passcode.
Use this function to turn on the entire system, both perimeter and interior
without delays. When entering COMMAND 11, remember that the second
1 must be pressed within 2 seconds after pressing the first 1 .
COMMAND
1 1
Using Command 11:
1. Ensure that all points are secure. All of the Point Status indicator lights
on the Command Center should be off. If they're not, see the section
describing Force Arming the System.
2. Press the COMMAND bar. The Command Mode indicator light comes
on.
3. Press the 1 key. Now press the 1 key again.
4. The PERIMETER, INSTANT, and INTERIOR lights come on. This
indicates that the perimeter, instant, and interior points are armed
without entry/exit delay time.
5. To disarm your security system, enter your personal passcode and
press ENT.
10
Advertisement
