Advertisement
Personal Passcode Change
I have this feature.
I do not have this feature.
This feature requires a passcode.
Your security system provides you with the convenient feature of
changing your personal passcode whenever you feel it necessary, without
the services of your alarm technician. It is recommended that you write
down both your old and new passcodes before you begin.
Before You Begin:
• Care should be given when entering a passcode containing the same
digits in consecutive positions within the new passcode (e.g.: "3" in
33467). When entering this type of passcode, it is easy to make
mistakes.
• The passcode can be from 3 to 6 digits in length.
• To avoid conflicting with other passcodes and duress codes, your
system does not let you change to passcodes that are within plus or
minus 2 of an existing passcode. For example, if 1234 were an existing
code, your system would not let you change your code to 1232,
1233,1235, or 1236.
COMMAND
5 5
To change your personal passcode:
1. Ensure that your security system is idle.
2. Press the COMMAND bar. The Command Mode indicator light comes
on.
3. Press the 5 key and then the 5 key again. Your security system now in
the passcode change mode.
4. Enter the passcode you wish to change. Press the ENT key.
5. Enter the new passcode. Press the ENT key.
6. Enter the new passcode again. Press the ENT key.
7. Test the new passcode by using it to arm and disarm the system. Do
not use any of the Command Center arming commands to arm the
system until you are certain that the new passcode is working.
19
Advertisement
