This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO SPM 6600/8600 has superior performance and greater flexibility than any other stereo powered mixer in its price range. Please read this manual carefully to get the most out of your new unit.
ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: Read all instructions before using the product. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.).
Offering top-of-the-line performance, features, ease of operating flexibility, and rugged construction for long-life reliability, the SPM Series is the best choices available in stereo powered mixers. • SPM 6600 — 6 balanced or unbalanced XLR mic inputs and 6 balanced or unbalanced 1/4" TRS mono line inputs •...
[Please note: Nady Systems is not responsible for shipping damage. If your unit is damaged, do not return to Nady, but notify your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made by the consignee in a timely manner.]...
CONTROLS AND CONNECTIONS 1. MONO INPUT SECTION (1) PAN CONTROL The Channel Pan positions the output of the channel in the stereo field of the Master Mix. Its constant-power design ensures there are no level discrepancies whether a signal is hard-panned L or R, center-stage, or somewhere in-between.
CONTROLS AND CONNECTIONS [Note: Always reset a channel’s input Gain (or external devices’ output level) after altering the amount of mixer equalization cut or boost applied.] The key to successful equalization is to avoid excess. Too much equalization on the input channels will result in a mix that is smeared together with nothing specifically defined.
CONTROLS AND CONNECTIONS (11) L AND R LED VU METER This will display the relative output level of the Left and Right Main PWR AMPS MODE (25) in STEREO and BRIDGE MODE. It will also display the relative output level of the PWR AMPS MODE (25) in the MAIN/MONITOR switch position .
CONTROLS AND CONNECTIONS (19) (22) 4. MASTER CONTROL SECTION (19 & 22) AUX 1 AND 2 RETURNS CONTROLS These are input controls that adjust the levels of the signal at the AUX input jacks. 20) DSP/MIX This is a master control that adjust the return of the DSP signals that effect all channels.
CONTROLS AND CONNECTIONS (30) (31) 5. INPUT / OUTPUT JACKS 30) AUX SEND JACK The AUX SEND JACK provides a mono mixed signal from the input channels to an external effects unit or other devices. The signal is adjusted by the AUX/DSP (3) controls of each channel and by the AUX SEND (21) control.
CONTROLS AND CONNECTIONS (37) (38) (39) 40) AC VOLTAGE SELECTOR SWITCH Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V 7. SPEAKER CONNECTION EXAMPLES The following speaker connections can be used for STEREO or MONITOR MAIN operations.
Page 15
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com...