Accessing The Nvr - EverFocus ENVR8304E-8CH Quick Installation Manual

4. Accessing the NVR

You can look up the IP address and access the Web interface of the NVR using the IP Utility (IPU)
program, which is contained in the CD. It can also be downloaded from EverFocus' Website:
http://www.everfocus.com/tools.cfm. Please connect the NVR in the same LAN of your
computer.
1. Install and then start the IPU program
2. IPU will automatically search the IP devices connected in the LAN. The default network
values of the IP devices will be displayed. By default, the network protocol of the IP device is
DHCP.
3. To configure the network settings, select an IP device and then click Login/Multi Login.
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one NVRs that have the same user ID / password, you will
be able to log in several NVRs at once.
5. You might be required to download ActiveX and JAVA software for viewing the camera
feed. If asked, click Yes. For more details, please refer to 5. Install JAVA Runtime and 6.
Browser Security Setting.
. The following dialog box appears.
10
ENVR8304E-8CH