Formatting The Hdd; Making Connections; Starting Formatting - Canon iR8500 Servise Manual

Hide thumbs Also See for iR8500:

Table of Contents

CHAPTER 6 TROUBLESHOOTING

7.5 Formatting the HDD

If you have replaced the HDD, you must format it and then download the system soft-

ware, RUI, and language.

The discussions that follow assume the use of a parallel cable:

1) Using a parallel cable, connect the PC to the parallel connector on the left side of the

• At this time, the PC must remain OFF.

• Connect the 25-pin connector of the bi-Centronics cable to the PC and the 36-pin con-

nector to the machine.

2) Turn on the PC, and start up the Service Support Tool.

3) Connect the machine's power plug to the power outlet; while holding down '2' and '8'

of the keypad at the same time, turn on the main power switch.

1) Under 'Downloading/Uploading', select 'To Next'.

2000 2000 2000 2000

CANON iR8500 REV.0 MAR. 2001