Firmware Update For Trekstor I.beat Clip - TrekStor i.Beat clip Operating Instructions Manual

Adjusting the volume
Briefly press the
If you hold down the
i
changes at a constant rate.
Changing the playback mode
Your MP3 player has two playback modes: "s
". The playback mode is changed via the
All
Repeat all: In the playback mode "r
position ), all of the tracks are played in sequence.
o
Random playback: In the playback mode "s
switch in position

7) Firmware update for TrekStor i.Beat clip

The firmware is the program responsible for the control
of your MP3 player. A firmware update serves to transfer
firmware upgrades to your MP3 player. If you should
encounter any problems with your MP3 player, please make
sure that you have installed the latest firmware version.
A firmware update is possible only under Windows® and
i
not under Linux® and Mac® OS X.
You can update the i.Beat clip with the most current
firmware from the Internet. This can be found on the
TrekStor website www.trekstor.de under "d
Please make sure that you follow the instructions supplied
with the firmware update exactly.
EN 24
- or button to raise or lower the volume.
, ;
- or
,
), all tracks are played in a random order.
n
button, the volume
;
huffle
/
o
" (slide switch in
epeAt All
huffle
ownloAds
" and "r
epeAt
slide switch.
n
" (slide
".