Installation And Connection - Alto AEQ215 User Manual

INSTALLATION AND CONNECTION

Read this section carefully. Not paying enough attention to the input signal's level, routing, or assignment of can result
in unwanted distortion, a corrupted signal or no sound at all.
Power Connection
Use the same fuse as marked on the fuse holder near the power connector. Connect AEQ215 to a standard power
outlet using the included power cable.
Audio Connection
AEQ215 is equipped with balanced XLR connectors. It can be connected to other units in a variety of ways to support
a vast range of applications without experiencing signal loss. Use only high-quality shielded audio cables.
Wiring Configuration
AEQ215 has both balanced and unbalanced connections, ensuring compatibility with other common audio processors
and mixers.
Please see following drawings for details:
Ring=Right Signal
Tip
Sleeve
Ring
Strain clamp
Tip=Left Signal
Sleeve=Ground/Screen
Use for Headphones
1/4" Stereo (TRS) Connector
Tip
Sleeve
Tip=Signal
Strain clamp
Sleeve=Ground/Sleeve
Use for mono line in, mono 1/4" connections
1/4" Mono (TS) Connector
Ring=Return Signal
Tip
Sleeve
Ring
Strain clamp Tip=Send Signal
Sleeve=Ground/Screen
Use for Insert Points
1/4" Stereo TRS Connector
8