1. Introduction The EQU231-MKII V2 Graphic Stereo 31-Band Equalizer is an extremely musical and flexible Graphic Equalizer, based on many years of experience and designed to provide a permanent precise equalization to musician, performer, and studio engineer. It can be used wherever is requested to modify the frequency “contour”...
2. Specification Type EQU231-MKII V2 2*31-Band: 1/3 Octave, ISO spacing(2H series) Slider Travel 20mm with positive centre detent Range +/-6dB or +/-12dB selectable Active balanced XLR and 1/4'' TRS Input connections Unbalanced RCA 20k Ω(bal.) Input impedance 15k Ω(unbal.) Maximum input level 14 dBu Active balanced XLR and 1/4'' TRS Output connections...
7. Test Procedure EQU231-MKII V2 Finished Product Test Test Instruments 1. AP (Audio Precision) 2. Dual-track oscilloscope Instrument setting 1. Set proper AC input voltage 2. Connect the output signal of AP to the input of EQU231-MKII V2 3. Connect the output of EQU231-MKII V2 to the input of AP Adjustment according to following procedures 1.
Page 14
4. Adjust the input level so that the AP output is 0dB, the frequency response is as following 5. Adjust the input level so that the AP output is 0dB, press the HI-pass button and the frequency response is as following 6.
Page 15
7. Press EQ button down, keep RANGE out and the LED indicates +12, adjust slide buttons to maximum and minimum, measure the frequency response independently and the curve shall be as following 8. Turn off the AP input signal and set input level as maximum, the AP setting is as following, now it shall be no more than -82dB --- 13 ---...
Page 16
9. Turn on the AP input signal, and set the input level at maximum, the AP setting is as following, the maximum non-distortion level is +28dBu+/-1dB and distortion is 1% 10. Now, the S/N shall be no less than 110dB 11.