Table of Contents
Advertisement
11. Band keys
These keys are used to select the frequency band that you need to modify its gain value.
12. Mounting ear
This detachable mounting ear is used for your convenient installation.
3.2 The Rear Panel
TIP/PIN 2
RING/PIN 3
SLEEVE/PIN 1
POWER
9 VAC
Rated Power Consumption 8W
(13)
13. POWER INLET
This jack is used to connect the AC power supply with the supplied 9V AC adapter.
14. OUTPUT
These are XLR and 1/4
channel inserts of a mixing console or power amplifier's inputs.
15. INPUT
These XLR and 1/4
inserts of a mixing console.
16. USB SERIAL PORT
This serial port is used to connect the unit to PC with the supplied transmission line.
4. INSTALLATION & CONNECTION
4. INSTALLATION & CONNECTION
4.1 Mains Connection
The 9VAC adapter that meets all the international safety regulations is supplied with your
Before power on the DIGAN2.14, please make sure all connections have been made correctly and the volume
controls of the amplifier or mixer are turned down.
4.2 Audio Connection
Both XLR and 1/4 " TRS connectors are available on your
DIGAN2.14 in several different ways without experiencing any noise or signal loss. You can use your DIGAN2.14
with single instruments using the mixer's main insert or on "in-line" between a mixing console's output and a power
amplifier.
- Wiring Configuration
Either the 1/4" TRS phone jack or XLR connector can be wired in balanced and unbalanced modes, which will
be determined by the actual application status, please wire your system as the following wiring examples:
For 1/4" Phone jack
TS Type Unbalanced
For XLR connector
OUTPUT
CH.B
CH.A
TIP/PIN 2
RING/PIN 3
SLEEVE/PIN 1
(14)
"T
RS balanced connectors, which are used to connect sources such as the
"T
RS balanced connectors, which are used to connect devices such as the channel
+
Tip
Sleeve
Pin2 (+)
Pin3 (-)
(Linked to Pin1 manually,
Pin1 ( )
XLR Type Unbalanced
INPUT
CH.B
CH.A
USB
SERIAL PORT
(15)
(16)
LTO DIGAN2.14. In this way you can interface your
+
-
Tip
Ring
Sleeve
TRS Type Balanced
Pin3 (-)
)
5
MODEL
SERIAL
LTO DIGAN2.14.
+
Tip
Ring
Sleeve
TRS Type Unbalanced
Pin2 (+)
Pin1 ( )
XLR Type alanced
B
Advertisement
Table of Contents
