Display Assembly - HP 245 G4 Maintenance And Service Manual

Display assembly

This section describes removing the display assembly and disassembling display subcomponents.
If you only need to remove the display bezel, webcam/microphone module, or display panel, you do not need
to remove the entire display assembly from the computer.
Description
Raw display panel (35.6-cm [14.0-in], HD, WLED, BrightView; includes insulator screws)
For use in HP Notebook models without a touch screen
For use in HP Notebook models with a touch screen
For use in HP 245 G4 models
Antenna (includes insulator screws)
Display bezel (includes insulator screws)
For use in HP Notebook models
For use in HP 245 G4 Notebook models
Display cable (includes display panel cable and webcam/microphone cable; includes insulator screws)
For use in non-touch screen models
For use in touch screen models
Display enclosure for use in HP Notebook models (includes insulator screws)
Black models
Red models
White silver models
Turbo silver models
Blue models
Purple models
Display enclosure for use in HP 245 G4 Notebook models (includes insulator screws)
Hinges (left and right) (includes insulator screws)
Webcam/microphone module (includes insulator screws)
VGA
HD
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 30).
Spare part number
813518-001
813520-001
814811-001
813485-001
813501-001
815227-001
813503-001
814042-001
813497-001
813493-001
813487-001
813495-001
813489-001
813491-001
814808-001
813511-001
813525-001
813527-001