Emmc Drive - HP 245 G4 Maintenance And Service Manual

eMMC drive

Description
eMMC drive, 32-MB (includes bracket)
Before removing the eMMC drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the eMMC drive:
1. Disconnect the drive cable from the system board (1).
2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the eMMC drive to the computer.
3. Lift the drive from the computer (3).
Battery on page 30).
Optical drive on page
Bottom cover on page
31), if installed.
34).
Component replacement procedures
Spare part number
822381-001
39