b.
Flex the inside of the bottom edge (1), the left and right edges (2), and the top edge (3) of the
display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel (4).
2.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Lift to disengage the adhesive that secures the webcam/microphone module to the display, and
then remove the module (1) enough to disconnect the cable.
62
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts