Osd Configuration - EverFocus EZN850 Installation Manual

5. OSD Configuration

Please turn the control key selection switch at the back panel to "OSD" (
Detach the control key and use this key to do OSD setting.
I. Bring up the General OSD Menu
Simply press the mini-joystick to bring up the general OSD menu.
II. Navigate among the OSD Menu Items
Turn joystick up ( ) or down ( ) to move the cursor up or down.
III. Change Modes or Setting Parameters
Turn joystick left ( ) or right ( ) to adjust the mode or parameter of settings.
IV. Switch to Sub-menu Screens
When the item with sub-menu is selected, press the mini-joystick to switch to
the sub-menu for further settings. Please refer to the diagram below.
Mini joystick
19
EZN850
).
UP
The Cursors & mini stick