Minimum Computer Requirements - EverFocus EZN850 Installation Manual

This installation guide provides instructions for installing the EZN850 IP Camera. For
all other aspects of using this product, please refer to EZN850 User's Manual, which
is available on the CD included in this package.
Installation steps
1. Confirm that your PC meet minimum computer requirement listed below.
2. In order to configure IP cameras and Encoders, Internet Explorer is required for
login the system. PC network setting must be done prior to camera configuration
setup. Please ensure your PC relative connections are correctly and affirmatively
linked. Please consult your ISP or network administrators for more detail of network
setting reference.
3. Mount the camera and connect Cables. Please see "3. Installation" on page 9.
4. Network Connection. 3 typical types of network connection. Please see "6.
Network Connection" on page 21.
5. Set up IP address and network setting by IP Utility. See "7. Assign IP address by
Utility" on page 23.
Package Contents
Network camera (x1)
Printed Installation Guide (x1)
Software APs including user's manual CD (x1)
Mounting kit includes:
-Long Screws x 4 (for mounting bracket)
-Short Screws x 4 (for connecting camera body to bracket)
-Expanding Screws x 4
-Hex key x 1 (for adjusting bracket)
-Hexagon wrench x 1 (for adjusting sunshield)

Minimum Computer Requirements

-CPU: PC Pentium IV (2.0 GHz or higher) / AMD Athlon (or higher)
-VGA card: 32 MB min. 16.7 million colours, with DirectX9.0c support
-Memory: 512 MB RAM min., 1 GB HD space or above
Additional HD space depends on required local storage of video files,
100 Mbps network card
-Screen Resolution: 1024 x 768 pixels or higher, 32-bit pixel color resolution
-Operating system: Windows XP, service pack 3 or higher
-Software: DirectX9,0c, Internet Explorer 6.0 or higher
Note!! Please connect to Microsoft's Web Site for downloading.
2
EZN850