Sewing - Pfaff 918 U Instruction Manual

10

Sewing

In the sewing mode all relevant settings for the sewing operation are displayed. Functions can
be switched on or off by pressing a key. Values for start and end backtacks or stitch
placement can be changed directly.
Switch on the machine.
If necessary switch off the function "darning seam" or "counted seam", see Chapter 10.01
Darning program or Chapter 10.02 Counted seam.
Functions in manual sewing, also see Chapter 7.12.02 Function keys:
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal..
When the machine is switched on, the sewing mode is always activated.
3 3 3 3
A B C D
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
Presser foot raised on/off
The "Darning program" and "Counted seam" functions are explained in more detail
in Chapter 10.01 Darning program or Chapter 10.02 Counted seam.
Presser foot raised at end of seam on/off
Thread trimming on/off
Darning program on/off
Counted seam on/off
Sewing
10 - 1