Pfaff 918 U Instruction Manual page 27

TE
700
Sew one stitch by operating the pedal.
Turn the balance wheel in the direction of sewing until the tip of the needle is level with the
top edge of the needle plate.
By pressing the corresponding +/- key, select parameter "702".
TE
702
By pressing the corresponding +/- key, enter the value "70".
By pressing the corresponding +/- key, select parameter "703".
TE
703
By pressing the corresponding +/- key, enter the value "222".
Conclude the adjustment of the sewing motor by pressing the TE/Speed key.
The adjustment described above only applies to machines with Eco-Drive!
When using another type of motor, please observe the motor instruction manual
of the manufacturer.
Installation and commissioning
0
C
70
C
222
C
8 - 7