Samsung SCL700 Service Manual page 54

2. The following chart shows the function of each button. In service adjustment mode, button names are
different from those in customer camera function control mode. EX)DISPLAY button is the same as con-
firm.
Button
BLC
FADE
P.AE
DSE
ENTER
DATA DOWN
MODE DOWN
MODE UP
DATA UP
The following table shows the data of each address that you must adjust.
ADDRESS DATA
5E8
5E9
5EA
5EB
4-2-3 (b) ADJUSTMENT
Please, aim at colorbar chart or colorful object.
1. Contrast
1) Adjust ADDRESS that a data of 5E8 is equal to 2E(default). If you want, you can adjust other data in
range "00~35"
2) Adjust ADDRESS that a data of 5E9 is equal to 15(default). If you want, you can adjust other data in
range "00~35" (Adjustment of 5EA, 5EB is in the same way.)
3) Adjust ADDRESS that a data of 5EA is equal to 15(default).
4) Adjust ADDRESS that a data of 5EB is equal to 1A(default).
Samsung Electronics
When change the adjustment mode.
When change the adjustment mode.
When change data value of adjust state.
Data store after finishing adjustment by "DATA UP/DATA DOWN" button
MEAN
2E CONTRAST
15 BRIGHT R
15 BRIGHT G
1A BRIGHT B
Alignment and Adjustment
Function
REMARK ADJUSTMENT RANGE
DEFAULT
DEFAULT
DEFAULT
DEFAULT
MODE '100' UP
CONFIRM
FOCUS
NEAR/FAR
00~35
00~35
00~35
00~35
4-37