Adjustment
2-5-2 Tracking Adjustment
1. Play back the alignment tape. (Tracking B or C)
2. Turn P2 to flatten the waveform at the inlet.
3. Turn P5 to flatten the waveform at the outlet.
P5
Fig. 2-10
2-8
2-5-3 Not Adjustment
1. Play back the alignment tape, and confirm that
the tape is not loosened between the Capstan
Motor and Cuide Roller T.
2. Set to REV mode and observe the outlet
waveform of PB RF signal. (Fig. 2-12)
P7 CAPSTAN
P2
TAPE SHOULD NOT BE
LOOSENED HERE
(NG)
GUIDE ROLLER T (P5)
GUIDE
ROLLER
S (P2)
Fig. 2-11
(GOOD)
Fig. 2-12
Samsung Electronics