Utax CD 5140 User Manual page 303

Troubleshooting > Responding to Error Messages
S
Error Message
Scanner memory is full.*
Send error.*
System error.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
T
Error Message
The cover is open.
The phone receiver is off the
hook.
This memory is not formatted.
Toner is empty.
Toner is running out.
U
Error Message
Unknown Toner Installed.
Unknown Toner Installed. PC
W
Error Message
Warning low memory.
Checkpoints
—
—
—
Checkpoints
Is there any cover which is
open?
—
Is the removable memory
formatted by this machine?
—
—
Checkpoints
Is the installed toner container
our own brand?
Does the installed toner
container's regional specification
match the machine's?
Checkpoints
—
10-18
Corrective Actions
Scanning cannot be performed due to
insufficient memory of scanner. Only
one copy of the scanned pages is
available. Press [Continue] to print,
send or store the scanned pages. Press
[Cancel] to cancel the printing job.
An error has occurred during
transmission. Refer to Responding to
Send Error for the error code and
corrective actions.
System error has occurred. Follow the
instructions on the touch panel.
Corrective Actions
Close the cover indicated on the touch
panel.
Put down the receiver.
Perform [Format] on this machine.
Replace the toner container.
It is almost time to replace the toner
container. Obtain a new toner container.
Corrective Actions
We will not be liable for any damage
caused by the use of third party supplies
in this machine.
Install the specified container.
Corrective Actions
Job cannot be started. Try again later.
Reference
Page
—
10-19
—
Reference
Page
—
—
—
10-2
—
Reference
Page
—
—
Reference
Page
—