Panasonic BB-HCM311 Troubleshooting Manual page 8

Troubleshooting
Problem
The Top page is
not displayed.
8
• The connection type is wrong (see page 55 of the Operating
Instructions on the Setup CD-ROM).
If the camera is not connected to the network in the [Auto
Negotiation] setting, set up the camera and the router seeing
the following table.
Network Camera
Router or hub
Auto Negotiation
Full Duplex
100Base-
TX
Half Duplex
Full Duplex
10Base-T
Half Duplex
• The default gateway or DNS server addresses may be wrong.
The correct IP addresses are required especially when you are
using the Viewnetcam.com service.
Assign the correct default gateway and DNS server
addresses (see page 51 of the Operating Instructions on the
Setup CD-ROM).
Cause and Remedy
100Base-TX
Auto
Negotiation
Full
Duplex
—
—
—
— —
—
10Base-TX
Half Full
Half
Duplex Duplex
Duplex
—
— —
—
— —
— —
— —