Related Manuals for Remington HC5800
Summary of Contents for Remington HC5800
- Page 1 HC5800 HC5600 HC5400...
- Page 2 Thank you for choosing Remington®. Our products are designed to meet the highest standard of quality, functionality and design. We hope you enjoy using your new Remington® product. Please read the instructions for use carefully and keep in a safe place for future reference.
-
Page 3: C Getting Started
• Fully recharge your product when you would like to use it again. When the unit is switched on and fully charged, the product can be used in cordless mode • Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and HC5800. for up to 60 minutes for the HC5400 and up to 120 minutes for the HC5600 & HC5800. - Page 4 • There are 3 settings for the Dual Boost system: Off, On, Boost. maximum comb attachment. • If the clipper is set to on, it will run at regular power. • If the clipper is set to boost, it will provide maximum power. , STeP 1 – Nape of the neck • Set the comb to 3mm or 6mm. , AuTO BOOST SySTeM (HC5800) • Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of • There are 3 settings for the Auto Boost system: Off, Auto, Boost the head at the base of the neck. • If the Clipper is set to Auto, it will run at regular power under low load conditions. • Slowly lift the clipper, working upwards and outwards through the hair, trimming just a • When more power is needed, the clipper will automatically sense this and provide...
-
Page 5: Battery Removal
Ballymount, Dublin 12. www.remington.co.uk BATTeRy ReMOVAL I RegISTeR ONLINe fOR • The battery must be removed from the appliance before it is scrapped. • The appliance must be disconnected from the supply mains when removing the battery. £10,000 prize draw, EXTRA year guarantee, FREE rewards gallery. • Ensure that the clipper is discharged of all power and disconnected from the mains. Visit www.productregister.co.uk/remington. you must register within 28 days • Remove the screw cover from back housing. of purchase. • Using a small screwdriver, remove (1) screw from the bottom of the clipper. • Pry the front panel from the front housing and expose the inner housing . • Using a small screwdriver, remove (4) screws from inner housing • Pry the cover of inner housing and expose the PCB and batteries. • Cut or break the wire stamps on the both end of the batteries and remove the batteries. • The battery is to be disposed of safely. - Page 7 Model No. HC5800/HC5600/HC5400 13/UK/HC5800/HC5600/HC5400 T22-0001003 Version 01 /13 Remington® is a Registered Trade Mark of Spectrum Brands, Inc., or one of its subsidiaries. Spectrum Brands (UK) Ltd Fir Street, Failsworth, Manchester M35 0HS www.remington.co.uk © 2013 SBI...