Muratec MFX-2500 Operating Instructions Manual page 16

13
One-touch keys — The keys labeled 01-78 offer one-touch dialling conve-
nience. You also can use the keys labeled 79-84 for programmable functions:
this lets you teach your machine an advanced multi-step function just once,
then recall the function at any time by pressing one of these keys.
14
Soft Keys — Shortcut keys. Any function that can be turned on or off can be
programmed into these four keys. If the light above one of these keys glows,
this indicates the setting that's been programmed into it (see page 2.15 in "Fax
Reference" or page 2.11 in "Copy Reference") is turned on. These keys are pro-
grammed at the factory to turn the following functions on or off:
Soft Key 1: — Press this key to set the machine to stamp each original
STAMP
document or page automatically when the machine transmits it successfully.
Soft Key 2: — Press to turn the security reception feature on or off.
SECURITY
Soft Key 3: / — Press to turn the monitor speaker off or on. When
MONITOR CALL
it's on, it allows you to hear the call you're making. When using this feature,
you can only hear the communication taking place. You cannot be heard
unless you use a handset (optional). When sending a fax, this key also acti-
vates the call request feature.
Soft Key 4:
MEMORY TRANSMIT
machine uses, whether from memory or from the document feeder.
15
— Press to begin a fax communication or copying.
START
16
— An all-purpose "Whoa!" key. Stops the current operation and ejects a
STOP
document from the document feeder.
17
— Press to cancel the settings.
RESET
18
Cursor key — Use in various scenes, to select an item on
the numbers when you are setting up the machine.
19
— Press to enter the Sleep mode. If you press it for 3 seconds,
ENERGY SAVING
it will be in the Auto power off mode. Press this key again to return to
standby mode. (See page 1.7 for details.)
20
— When the frame of the item at the lower part on
NEXT
double or more lines, it means that you can select more items. Press this key
to show the more items.
— Selects which transmission mode your
or the enter
LCD
is shown with
LCD
21
Select function keys — These keys correspond to the items at the lower
part on the . Press to choose item at the lower part on
LCD
22
— Press to change from Copy mode to Fax mode.
FAX
23
— Press to change from Fax mode to Copy mode.
COPY
Getting started
.
LCD
1.5