Schedule - Cobra 2007 King 50 Service Manual

7. Your Cobra Motorcycle has a 10 digit VIN (Vehicle Identification Number).
The first two digits indicate the model and the seventh indicates the model
year (MY).
a. Example, Acxxxx7xxx is a 2007 MY CX50 SR.

Schedule

•
Between each ride
Check the air filter (clean and re-oil as necessary).
o
Insure the smooth operation of the throttle cable (throttle soundly
o
'clacks' shut).
Check for frayed strands of the throttle cable inside the throttle housing
o
and replace if necessary.
Check for adequate tire pressures and adjust if necessary.
o
Check all nuts and bolts for proper torque and re-torque if necessary.
o
Spray all moving parts with WD40 or other light oil.
o
Check drive chain for
o
Proper tension and adjust if necessary.
Adequate lubrication and lubricate if necessary.
Insure that the ignition stator and rotor are clean and dry.
o
Check the frame for cracks in the metal or cracks in the paint that
o
might indicate that the metal has been stressed beyond it's safe limits.
Replace or get properly rewelded as necessary.
Check the rims for signs of stress, like cracks around the rim, spokes
o
and hub.
•
Every 2 hours of operation
Replace the transmission oil.
o
•
Every 10 hours of operation
Replace the fork oil.
o
Have the shock oil replaced by a Certified Cobra Mechanic.
o
CAUTION:
1. Because of the amount of heat generated by the clutch and engine during
extended periods of riding, it is advisable to remove the ignition cover
afterward to allow the ignition to cool off. The heat transfers through the
cases and can damage the stator as it cools off because of lack of airflow
around the stator.
2. If you ever need to weld anything on the bike, disconnect the spark plug
cap, unplug the ignition, disconnect the kill switch, scrape the paint bare
near the area to be welded and put the ground clamp as close to the area
to be welded as possible.
Be sure the fuel tank and carburetor have been removed and safely located
away from the welding process.
11