General Tips; Maintenance; Schedule & Tips - Cobra 2005 King Owner's Manual

Table of Contents

Advertisement

This is a high performance race motorcycle. Too much application of throttle will
likely land your little racer on his or her arse. Fenders can be replaced but
bruised egos and other body parts take longer.

General Tips

1.
Always wear a helmet and other protective riding gear.
2.
Cobra recommends that you tell your child to take it easy the first couple of
minutes in practice until the engine comes up to full operating temperature.
3.
Make sure your riders' foot is not resting on the foot brake while they are
riding
.
4.
Evaluate the bikes jetting only after it has been warmed up to race
temperatures.
5.
A properly maintained machine is safer, faster, and more fun to ride.
6.
Filling your transmission with more than 8.0 oz (235ml) of lubricant may
help to transfer heat from the clutch, but be aware that this extra oil will
increase the frictional drag on the engine, thus reducing power, and will
often get purged out the crankcase vent during riding.
7.
New chains will stretch on first use. Never install a new chain prior to a
race. Always 'break' them in during practice.
8.
Your Cobra Motorcycle has a 10 digit VIN (Vehicle Identification Number).
The first two digits indicate the model and the seventh indicates the model
year (MY).
a. Example, Acxxxx5xxx is a 2005 MY King.
Schedule & Tips
It is important that you adhere to this maintenance schedule so as to promote the
longevity of your Cobra Motorcycle.
Between each ride
Check the air filter (clean and re-oil as necessary).
o
Insure the smooth operation of the throttle cable (throttle soundly
o
'clacks' shut).
Check for frayed strands of the throttle cable inside the throttle housing
o
and replace if necessary.
Check for adequate tire pressures and adjust if necessary.
o
Check all nuts and bolts for proper torque and re-torque if necessary.
o
Spray all moving parts with WD40 or other light oil.
o
Check drive chain for
o
Proper tension and adjust if necessary.
Adequate lubrication and lubricate if necessary.
Insure that the ignition stator and rotor are clean and dry.
o

Maintenance

10

Advertisement

Table of Contents
loading

Table of Contents