Editing An E-Mail Target In The E-Mail Address Book; Setting A Group; Adding A Group - Fujitsu N7100 Operator's Manual

F.6

Editing an e-Mail Target in the e-Mail Address Book

This section describes how to edit e-mail targets in the e-mail address book.
An e-mail address book can contain up to 5,000 groups, distribution lists, and e-mail
addresses.
F.6.1 Setting a Group
Set groups in the e-mail address book.
A group can contain multiple distribution lists and e-mail addresses, which allows e-mail
destinations to be sorted according to the respective purposes. Sub-groups can be
created under a group.
By specifying a group as an e-mail destination, an e-mail can be sent to all distribution
lists and e-mail addresses registered in the group at the same time.
Up to five levels can be set for groups.

■ Adding a Group

1. Select the [Address Book] tab.
2. In the group list, select a group to which the new group is to be added.
3. Open the [Add Group] dialog box in either of the following ways.
 Select the [Address Book] menu  [Add Group].
 Press the [Add Group] button.
4. Enter a [Group Name].
This can be up to 64 characters long. The following symbols cannot be used:
\ ; @
5. Press the [OK] button.
 The new group is added.
F.6 Editing an e-Mail Target in the e-Mail Address Book
443