Setting Image Mode - Fujitsu N7100 Operator's Manual

5.9.2 Setting Image Mode

To set an image mode (type) for the scanned document, follow the steps below.
You can set whether the document is scanned in "color", "grayscale" or "black & white".
1. Select [Image Mode] under [Basic] on the scan settings window.
 The [Image Mode] window appears.
2. Select the type of image to be output.
3. If [Automatic] is selected in
4. Press the [OK] button.
 The information entered is set.
Step 2, specify [Sensitivity].
283
5.9 Setting the Scan Options