Configuring The Network Admin Settings; Setting The Admin Connection - Fujitsu N7100 Operator's Manual

4.9

Configuring the Network Admin Settings

4.9.1 Setting the Admin Connection

To use the Admin Tool or Central Admin Server for the scanner, perform the connection
settings.
1. Select [Admin Connection] under [Network Admin].
 The [Admin Connection] window appears.
2. Specify each item.
3. Press the [OK] button.
 The information entered is set.
ATTENTION
The connection with the scanner is lost if the settings for the administration connection are
changed via the Admin Tool. To continue with other settings, close the Admin Tool and then
access the scanner via the Admin Tool again with the changed settings.

4.9 Configuring the Network Admin Settings

Touch
Panel
111
Central Admin
Console