Network Printer - Fujitsu N7100 Operator's Manual

(b-2) Registering a Network Printer and Then Selecting a Driver for the

Network Printer

1. Register a network printer.
When you add a network printer without a print server by using the relevant driver
for the network printer that is registered in [Printer List], you do not need to register
a new network printer. Proceed to the next step.
HINT
To register a new network printer, refer to
Server" (page 147)
Printer Is Published and Using the Driver" (page
2. Check the printer name or the IP address for the printer.
For details, refer to
Direct Printing)" (page
3. Check the driver name for the printer.
For details, refer to
(page 153).
4. Register a network printer without a print server.
Directly enter each item of the settings for network printers.
Up to 100 network printers can be registered.
For details, refer to
Step 4, refer to (b-2).
ATTENTION
Do not delete the network printer settings that were used to set a network printer without
a print server from the computer. If the settings are removed, the corresponding driver is
also removed from the scanner, and it may cause an error in printing.
or "(b-1) Downloading a Driver from a Computer on Which a Network
"Checking the Printer Name or the IP Address for the Printer (for
153).
"Checking the Driver Name for the Printer (for Direct Printing)"
"Registering a Network Printer (Network Path)" (page
149
4.14 Setting the Network Printers
"(a) Setting a Network Printer via a Print
148).
156). For