Fujitsu N7100 Operator's Manual page 350

6 Press the [Cleaning] button on the [Roller Cleaning] window.
When the button is pressed, the feed rollers and eject rollers rotate slightly.
Pressing the button continuously rotates the feed rollers and eject rollers
for a fixed amount every few seconds.
Gently clean the rollers as you rotate them. Take care not to damage the
soft rubber.
Stop pressing the button to stop the rollers rotating.
The pick rollers should be cleaned carefully and thoroughly, as black
residue on the rollers can adversely affect the paper pickup performance.
HINT
 Pressing the [Cleaning] button seven times rotates the feed rollers and eject
rollers approximately one complete revolution.
 When Help is shown, close it before pressing the [Cleaning] button.
7 When you have finished cleaning the rollers, press the [OK] button, and
close the [Roller Cleaning] window.
ATTENTION
When cleaning the feed rollers or eject rollers, be careful not to touch the
rollers with your fingers while they are rotating.
5. Close the LCD cover.
 You should hear a click.
ATTENTION
 Be careful that the LCD cover does not shut on your fingers.
 Confirm that the LCD cover is completely closed. If the cover is not completely closed,
document jams and feeding errors may occur.
 When closing the LCD cover, do not slam it shut by pushing the touch panel as this may
damage it.
6.3 Cleaning Inside the Scanner
350