Table of Contents
Advertisement
TROUBLESHOOTING PROCEDURES
B. 1 General
If problems occur at the initial installation phase, verity the equipment has been wired
properly and installed in accordance with the procedures in this manual and with other
operating equipment.
The following problem and solutions highlight basic troubleshooting guidelines.
Problem Possible Solution
a. No Video
1. Verity power to all pieces of equipment in the monitor.
2. Verity that the power switches are in the ON position.
3. Verity that the camera lens cap has been removed from the lens of that the iris of
the lens is open.
b. Video, But No Control
1. Power down the monitor for one minute and then turn the power back ON.
APPENDIX B.
50
Advertisement
Table of Contents
