Installation With Secondary Monitors - Hitron H4R15MX User Instructions

2-3. Installation with secondary monitors

The observation monitor has four video looping-out BNC jacks and one VCR modular
jack.
Perform the following steps after installing the monitor. See Figure 3.
A. Obtain the following equipment:
a. Monitors.
b. VCR interconnection cable.
c. BNC cables.
B. Place the secondary monitor and looping-out monitors in a convenient location.
C. Plug the Modular connector of the VCR interconnection cable into the "RECORDER"
port on the rear of the monitor.
D. Connect the "Audio In" connector to the "Audio In" port on the secondary monitor.
E. Connect the "Video In" connector to the "Video In" port on the
Use a RCA to BNC adapter and BNC cable if necessary.
F. Connect the "Video Out" connector to the "Video Out" port on the
Use a RCA to BNC adapter and BNC cable if necessary.
G. Connect the "Video Out" connector to the "Video Input" port on the looping-out
monitor for camera1.
H. Repeat step G for camera 2, 3, 4.
13
secondary monitor.
secondary monitor.