Table of Contents
Advertisement
DISK CAPACITY : Shows the total space available in Gigabytes.
·
·
USED SPACE (RECORD POSITION) : Shows the total space used by all video
recordings in the stop record mode and shows the record position in the overwrite
record mode.
DISK MODEL : Shows the model name of the used disk.
·
·
TIME LEFT (APPRX.) : Shows the left time of the disk. The time is approximately
calculated by the current recording status during 3 minutes.
SECTOR/SEC : Shows the number of the used sector of the disk at one second.
·
·
BAD SECTOR : Displays the status of HDD.
RECYCLE COUNTER : Shows the overwrite number of the disk.
·
4-11. Communications
ETHERNET ENABLE : Set to ON to allow access the network.
·
RS485 BAUD RATE : Set on of 38400, 19200, 9600, 4800, 2400.
·
RS485 MODE : Set on of MASTER and SLAVE.
·
MASTER : When the monitor transmits the command from the Ethernet to the RS485
port.
SLAVE : When the monitor is controlled by a controller.
COMMUNICATION SETUP
ETHERNET ENABLE
: ON
ETHERNET IP SETUP
>
ETHERNET USER SETUP
>
ETHERNET OVERVIEW
>
RS485 BAUD RATE
: 9600
RS485 MODE
: SLAVE
RS485 PROTOCOL
: OWN
40
Advertisement
Table of Contents
