Table of Contents
Advertisement
" Zoom Limit Setting
A limitation is provided to prohibit the
ZOOM operation in the direction of TELE,
exceeding the preset value.
Digital zoom: X36 - X720
Optical zoom: below X36
# Stabilizer
This function electronically compensates
for an unstable camera image due to
movement of a mounting pole or bracket.
1. Move the cursor to "STABILIZER" and select
"ON" or "OFF".
ON: Automatically compensates for an
unstable image.
OFF: Image stabilizer will not operate.
Default setting: OFF
$ Privacy Zone Setting
Up to 8 unwanted zones can be masked
on the monitor screen.
1. Move the cursor to "PRIVACY ZONE",
press the [LEFT] and [RIGHT] buttons
and select among "ON (1)", "ON (2)" or
"OFF". Then press the [SET] button.
ON (1): Turns on the privacy zone function.
(Grey)
ON (2): Turns on the privacy zone function.
(Mosaic)
OFF: Turns off the privacy zone function.
Default setting: OFF
2. When "ON (1)" or "ON (2)" is selected for
"PRIVACY ZONE" then press the [SET] button.
This will display the "ZONE NUMBER"
selection menu. The picture will be X1
wide angle (WIDE) if there is no privacy
zone defined for the current zone number.
**ZONE NUMBER 1/8**
RET TOP
3. Move the cursor to "ZONE NUMBER", and then
press the [LEFT] or [RIGHT] button to select
the zone number (1 to 8) you want to configure.
An asterisk (*) to the right of the number
indicates that it already has a privacy
28
zone configured for it. Selecting such a
zone number zooms the picture to the
zoom setting that was in effect when its
privacy zone settings were configured.
4. Press the [SET] button.
The appearance of the menu depends on
zone settings.
**ZONE NUMBER 1/8**
ZOOM/FOCUS
POSITION
ZONE SCALE
ZONE LEVEL
SET DEL
RET TOP
5. Move the cursor to "→ PUSH SET" to the
right of "ZOOM/FOCUS", and then press
the [SET] button.
This will display the ZOOM/FOCUS
setting menu.
**ZONE NUMBER 1/8**
ZOOM/FOCUS
POSITION
ZONE SCALE
ZOOM
ZONE LEVEL
SET DEL
RET TOP
6. Press the [UP], [DOWN], [RIGHT] or [LEFT]
button to adjust the zoom and focus
positions, and then press the [SET] button.
This completes the adjustment procedure
and returns to the zone setting menu.
Privacy zone should be set under low
magnification. If the privacy zone is set
under high magnification, it may shift.
7. Move the cursor to "→ PUSH SET" to the right
of "POSITION", and press the [SET] button.
This will display the POSITION setting menu.
8. Press the [UP], [DOWN], [RIGHT] or [LEFT]
button to set up the mask position of the
privacy zone, and then press the [SET] button.
This completes the setting procedure and
returns to the zone setting menu.
9. Move the cursor to "→ PUSH SET" to the right
of "ZONE SCALE", and press the [SET] button.
This will display the ZONE SCALE setting
menu.
PUSH SET
PUSH SET
PUSH SET
··I····2
-
+
PUSH SET
PUSH SET
PUSH SET
FOCUS
··I····2
-
+
Advertisement
Table of Contents
