Table of Contents
Advertisement
Carry the printer unit to the installation site.
After confirming that the covers and trays are closed, carry the printer by holding it by the lift handles from the front side.
If the optional paper feeder is installed
Remove the paper feeder from the printer, place the paper feeder on the new installation site, and then carry the printer to
the site.
Do not carry the printer with the paper feeder installed. If you do so, the paper feeder may drop resulting in personal
injury.
For details on the procedure for installing the paper feeder, see
4
Set the paper drawer in the printer.
Push it into the printer firmly.
5
Connect the removed cable or cord.
<How to connect the cable or cord>
*
USB cable
*
LAN cable
Power cord
*
Whether the cable is connected or not varies depending on your environment.
When transporting the printer unit
To prevent damage to the printer during transport, perform the following.
Connect to the USB connector on the printer.
Connect to the LAN connector on the printer.
(1) Plug the power cord to the power socket on the printer.
(2) Plug the power plug into the AC power outlet.
"Printer
Installation."
Advertisement
Table of Contents
