Table of Contents
Advertisement
07K5-091
Data Is Reduced and Printed
Perform the following procedure.
<Cause 1> The setting for the scaling factor is not appropriate.
Perform the following procedure in the printer driver.
Solution 1
Perform the following procedure in the printer driver.
Solution 2
1. Display the [Page Setup] sheet.
2. Clear the [Manual Scaling] check box.
If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size]
and [Output Size] automatically.
1. Display the [Page Setup] sheet.
2. Select the [Manual Scaling] check box, then specify an appropriate scale factor according to
the paper size to be used.
Advertisement
Table of Contents
