Table of Contents
Advertisement
(1)
[Update Now]
Clicking this button obtains information about the date and time from the SNTP server.
Reflects the obtained status to [Date and Time] and [SNTP Server Log] according to success or failure of obtaining
information.
For details on the SNTP settings, see
(2)
[Date and Time]
Displays the date and time obtained from the SNTP server.
The local time of the printer is displayed when the time and date could not be obtained for some reason, such as
that the SNTP server address is not specified.
(3)
[SNTP Server Log]
Displays the obtained status from the SNTP server.
When succeeded in obtaining the status
Synchronized with the SNTP server at <The date and time when they were obtained>.
Next synchronization in <The date and time when they are to be obtained next>.
While in the process of obtaining the status
Getting time from SNTP Server.
When failed to obtain the status
Failed to get time from SNTP Server.
(4)
[Save]
Saves the obtained security access log in text format.
(5)
[Clear]
Clears the obtained security access logs.
(6)
[Security Access Log]
Displays the obtained security access logs.
The date and time when the access was blocked, IP address, port number, and restriction type
*
"PRINT" (Rejected TCP/IP Print Jobs), "SNMP" (Rejected SNMP Monitoring or Setting Changes), or "SLP"
(Rejected Multicast Discoveries)
Up to 100 security access logs can be obtained.
When the number of logs exceeds 100, the logs are deleted starting from the oldest one.
"Configuring the Protocol
Settings."
*
are displayed.
Advertisement
Table of Contents
