Table of Contents
Advertisement
(1)
[Device Status]
Displays messages about the printer status.
Also, according to the printer status, the indicator color changes as follows.
(green)
(yellow)
(red)
(blinking red)
(2)
[Error Information]
When clicked, displays information (situation explanation, solutions, and so on) about the error occurring in the
printer.
(3)
[Paper Information]
Displays information about the paper sources.
(A): The names of each paper source
(B): The amount of paper remaining in each paper source
(C): The sizes of paper in each paper source
(4)
[Remaining Toner]
Displays the status of the toner cartridge. The contents and solutions of the messages are as follows.
Message
Available
Replacement
Needed Soon
Check Cartridge
Insert Cartridge
[Information] Page
The printer is in the normal state.
(The printer is ready to print or in the sleep mode.)
Some attention is required although this state does not affect the job.
(A Warning message is being displayed.)
The printer cannot print for some reason.
(An Error message is being displayed.)
A problem is occurring in the printer, and the printer does not operate properly.
(A service call is being displayed.)
Continue using as normal.
You can continue to print.
Have ready a new toner cartridge.
We recommend that you replace the toner cartridge before printing a large
amount of data.
You can continue to print.
A toner cartridge with print quality that cannot be guaranteed or a used toner
cartridge that reached their lifetime may be inserted.
Continuing to use the cartridge may cause a malfunction, so replacing the
cartridge with a new cartridge is recommended.
The printer stops printing.
Install the toner cartridge.
Contents and Solutions
Advertisement
Table of Contents
