Baffle Removal - Quadra-Fire VOYA-GRAND-MBK Owner's Manual

F. Baffle Removal
1. Remove all ash from the firebox, and extinguish all hot
embers before disposal into a metal container.
2. It is easier to remove both baffle boards and ceramic
blanket after the tube channel assembly has been partially
disassembled and the right side lowered. Follow steps
1 through 4 on page 23 for removal of the tube channel
assembly. It is not necessary to completely remove the
tube channel assembly.
3. Once the baffle protection cover has been removed, pull
the baffle boards and ceramic blanket forward about 1
inch (25mm) and then overlap the baffles about 1-2 inches
(25-51mm). Figure 23.1.
4. Slide the tube channel assembly to the left as far as it will
go and lower the right side. Remove the baffle boards
and ceramic blanket together. Figure 23.2.
4. Re-install in reverse order. Be sure the baffle boards and
ceramic blanket are in their proper positions. See Figure
12.1 on page 12.
Ceramic Blanket
Figure 23.1
The ceramic blanket and both baffle boards
and tube channel assembly can all be
removed at the same time.
Figure 23.2
October 14, 2013
Baffle Boards Overlapping
7075-208
VOYAGEUR GRAND
23