Display Setting Mode - Oregon Scientific AWS899 User Manual

2. Choose the settings that you want to adjust and
edit as shown in the Changing Settings section.
WALLPAPER Select ON / OFF. When enabled, the
selected photo will be shown on the
display when SNOOZE / PHOTO is
pressed in standby
SELECT Select 1 of the 6 pictures available
WALLPAPER
NOTE If you have not downloaded
any new pictures you can only select
the default picture "Smart Living".
Once you have downloaded your
own pictures you can only select 1
of these and not the default picture
DISPLAY MODE Select STILL or SLIDE SHOW
You can select to display just one
p h o t o a s Wa l l p a p e r o r a l l 6
downloaded photos in sequence
NOTE I f n o p i c t u r e h a s b e e n
downloaded, only STILL option can
be chosen
SLIDE SHOW Select the slide show display speed
FREQ – 5 SEC, 15 SEC or 30 SEC
EXIT Return to previous page
NOTE The WALLPAPER option must be set to ON to
access the other settings on this screen. Also, the SLIDE
SHOW option must be selected as the display mode to
access the SLIDE SHOW FREQ setting.

DISPLAY SETTING MODE

In this mode you can customize various system settings.
1. From the Main Menu, access the SETTINGS Mode.
Press UP / DOWN to
select DISPLAY
Setting Mode.
14