ATEN Master View CS-88A User Manual page 22

Starting Auto Scan:
To start Auto Scanning, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 15)
2. Key in [A]
After you press A, you automatically exit Hotkey Mode, and enter Auto
Scan Mode.
3. To exit Auto Scan Mode, press [Esc] or [Spacebar]
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant
keystrokes and mouse clicks can be input. You must exit Auto
Scan Mode in order to regain normal control of the console.
While you are in Auto Scan Mode, you can pause the scanning in order to
keep the focus on a particular computer by pressing P. During the time
that Auto Scanning is paused, the Command Line displays: Auto Scan:
Paused.
Pausing when you want to keep the focus on a particular computer is
more convenient than Exiting Auto Scan Mode because when you
Resume scanning, you start from where you left off. If, on the other hand,
you Exited and restarted, Scanning would start over from the very first
computer on the installation.
After pausing, to resume Auto Scanning, press any key. Scanning
continues from where it left off.
18 CS-88A User Manual
2002-12-27