Headlight - BMW R nineT Rider's Manual

8
Clip on muffler and ex-
haust manifold
86
18 lb/ft (25 Nm)

Headlight

Removing and installing
light housing
Switch off ignition (
Make sure ground is level and
firm and park motorcycle.
z
Loosen screw 1 with several
rotations.
Carefully pull light housing 2 in
lower area forward toward (ar-
row) and remove upward.
30).
Lay on light housing 1 behind
lug 2 and swivel downward.
Align light housing 1 in center.
The clips can be com-
pressed by striking the light
housing once. As a result secure
fastening of the light housing is
no longer ensured.
Do not use force.
Press screw 2 upward with
screwdriver.
Swivel light housing toward
rear.
Clip 1 engages in light housing.
Tighten screw 2.