Change Your Station Password; Change Your Dial Confirmation Tone; Change Your Handset Volume; Change Your Hold Recall Timer - Iwatsu 5930 icon series Quick Reference Manual

Speech Dialing
The Speech Dialing feature enables the user to
voice dial from their personal or company contacts
by accessing the Enterprise TOL Automatic Speech
Recognition (ASR) software. To voice dial using the
Speech Dialing feature simply press the Speech key
and say the name of the party that is stored in your
contact list. This feature can also be enabled for
prime line access when used with an ICON Series
5930/5910/5810 telephone enabled with a Bluetooth
headset.
Note: If you are not prompted to say a name when
you press the Speech key, your system is not con-
figured for this feature. Consult your system admin-
istrator before programming this key.
Make a Speech Call
1. Press the Speech key.
2. After the prompt, say the name of a contact that
is stored in the Enterprise TOL mailbox directory.
3. When prompted, confirm the contact name and
the contact is called.
Make a Speech Call Using a Bluetooth Headset
1. Press the Bluetooth Headset Off-hook button.
2. After the prompt, say the name of a contact that
is stored in the Enterprise TOL mailbox directory.
3. When prompted, confirm the contact name and
the contact is called.
Transfer a Call Using the Speech Key
1. While on a call, press the Conference key and
then press the Speech key.
2. Say the name of the party where you want to
transfer the call.
3. When prompted, confirm the contact name and
the contact is called.
4. When the party answers, announce the call and
press the Conference key again.
5. Disconnect.
23

Change Your Station Password

1. Press the Setup menu key.
2. Press User Options.
3. Enter your current Station Password and press
Enter.
4. Select Station Password.
5. Use the dial pad to enter a new four-digit numer-
ic Station Password.
6. Press Save and Exit to save your data and re-
turn to the main screen.

Change Your Dial Confirmation Tone

1. Press the Setup menu key.
2. Press User Options.
3. Enter your Station Password and press Enter.
4. Select Dial Confirmation Tone.
5. Use the left or right navigation keys to toggle the
Dial Confirmation Tone On or Off.
6. Press Save and Exit to save your change and
return to the main screen.
Change Your Default Handset Volume
If a change is made to the volume while off-hook,
the volume is reset to the value programmed here
after going on-hook.
1. Press the Setup menu key.
2. Press User Options.
3. Enter your Station Password and press Enter.
4. Select Handset Volume Control.
5. Use the left or right navigation keys to scroll to
set your Handset Volume to one of four options:
 Minimum Volume Level
 Medium Volume Level
 Maximum Volume Level
 Use Last Volume Level (Retain last setting)
6. Press Save and Exit to save your change and
return to the main screen.

Change Your Hold Recall Timer

1. Press the Setup menu key.
2. Press User Options.
3. Enter your Station Password and press Enter.
4. Press the right navigation key to move to the
next menu page.
5. Select Hold Recall Timer.
6. Use the dial pad to enter a new Hold Recall
Time.
 Range = 0-255 seconds
 Default = 0 (When set to 0, the system default
Hold Recall Time is used)
7. Press Save and Exit to save your change and
return to the main screen.
8